Requirements for Overvoltage Protection
With the introduction of the 18th Edition the decision-making process for inclusion of overvoltage protection in electrical installations has changed. Here, Dave Enefer, Devices Product Manager at Crabtree, one of Electrium’s leading brands in electrical components, looks at the latest requirements for overvoltage protection. In certain circumstances overvoltage protection is mandatory. For all other situations a risk assessment is necessary However, if there is no risk assessment carried out over voltage protection must be installed and in single unit dwellings the final decision is made on a value judgement. Overvoltage Protection Requirements Firstly, we must look at the area where protection against overvoltage must be provided. Designers must consider the consequences of overvoltage, and decide which circumstances apply to each type of building / installation under consideration. Over voltage protection is mandatory where the consequences of overvoltage can result in Serious injury to persons or loss of human life (e.g. nursing homes, care facilities, hospitals) Interruptions to public services (e.g. 999 call centres, communications & transport networks etc) Damage to cultural heritage (e.g. loss of irreplaceable artefacts records etc) Interruption to industrial & commercial activity (e.g. banking, online services data centres etc) Affects a large number of individuals in one location (e.g. high-rise buildings etc) For housing providers, the last one may be the most relevant. Where the above consequences of overvoltage could occur, protection is a requirement. (See Regulation 443.4). All Other Applications – Carry Out a Risk Assessment For circumstances other than those explained above a risk assessment must be carried out to determine if protection against transient overvoltage is necessary. The risk assessment calculation is now based upon a formula that uses values that are given in Table 443.1 and on values related to geographical locations shown in fig 44.2, which is a map of the UK. These values are used with figures that are determined by the lengths of supply cables to the origin of the installation to make a calculation. If the calculated risk level is 1000 or less, then protection is required. Readers should consult BS7671 for the full details of the risk assessment criteria & equation Single Dwellings An added consideration applies for single unit dwellings. Overvoltage will be required if no risk assessment is carried out or if the total value of the installation and the equipment therein justifies such protection. Or, as the regulations put it, overvoltage protection can be omitted if the total value of the installation and the equipment within does not justify such protection. So, how should designers look at this? In or out? Surely the cost of a Surge Protection Device (SPD) is a tiny fraction of the total value of the installation and the equipment? To make the decision to include protection it’s necessary to know the value of the electrical installation. An average domestic rewire cost is apparently around £3,000. Next step is to add in the value of the equipment in the installation that can be damaged by overvoltage. Typically, that would include quite a few items of fixed equipment e.g. central heating boiler, heating controls, intruder alarm, smoke alarms, CO alarm, LED lighting, possibly a PV installation or an EV charger all of this would cost several thousand pounds to replace. While some may not think it appropriate to include portable appliances such as freezer, fridge, washing machine, dryer, oven, microwave, broadband router, games console TVs. Laptop etc, these too can be permanently damaged by overvoltage. The low cost of investment in SPDs suggests that individual household installations should include the benefits of overvoltage protection, as standard, from January 2019 just like many other applications where overvoltage is mandated. For more information visit www.electrium.co.uk/crabtree
Expect Better From Your Accessories? Change To Instinct.
For nearly 100 years Crabtree has been leading innovations in the wiring accessory industry. With the Instinct range, we are proud to say that we are keeping this forward-looking spirit alive. Instinct has all your needs covered, with over 300 new wiring accessories in the range. The range features slimline plates with soft curves, smooth lines and contoured profiles. These carefully considered design details ensure they fit naturally into any environment with a classically timeless look that will serve gracefully. While the operation of every switch gives a satisfying feel of quality and class – the kind of finishing touch that leaves clients happy and impressed with their contractor. So, if you expect better, Instinct is the way to go. A choice that represents ambition, development and progress. Take a look at some of the innovations and products detailed below and judge for yourself. Full contact cable clamps Instinct is the first range of wiring accessories to use this proven technology. These ‘No Miss’ terminals offer a more secure, more efficient, method of connection. There is no chance of incorrect cable positioning and this terminal design eradicates the risk of cable core damage that occurs with screw terminals. Upward facing terminals We have created upward facing terminals throughout the range, all accessible from one orientation, all with an instantly recognisable terminal layout including segregated inline supply and load terminals, nested for convenience. This improves installation time. It’s quicker and easier to connect. Cables can be cut to the same length and use less of the interior space. It gives safer and more reliable installation – no twisting or turning of the plate means no loosening of cables that were just terminated. Fused Connection Units and Switches Our Fused Connection Units and 20A switches have an improved, unobtrusive, integrated LED switch indicator and feature full contact clamps, help to improve cable positioning and retention. Angled Keystone Modules Improved Keystone Modules are safer and sleeker, offering flexibility and cable security, with less bend to cables. The variety of modules caters for Data, HDMI, USB, TV, Phone and Satellite applications. Integrated USB Sockets 13A sockets with double pole switching and Integrated USB charging outlets that meet the latest product standard (BS1363-2:2016+A1) and include automatic charge optimisation to match the corresponding device. Find out more at www.crabtreecommercial.co.uk Make a choice for the better, change to Instinct.
